Lead Roof Entry Flashing Kit
A complete kit for securing any size mast (ideally 2 inch) through tiled roofs. It allows a firm base fixing on a joist with a clamp on a ratter just before the mast exits the roof void. With a lead entry plate to ensure the installation remains weatherproof this is an ideal solution for those installations where the only method of reception is through the roof!
Mast Base Bracket
For securing masts on horizontal surfaces with two hexagon wood screws 8 x 45. The mast is kept at a distance from the floor by a stop thus ensuring that antenna cables can be fed out. For pipe Ø 30-60mm.
Fixing Clamp
For securing masts with two hezagon wood screws on straight beams or on beams that slant to the left or right. For pipe Ø 48-50mm.
Lead Mast Roof Entry Plate
Roof covering for roofs slanted at angles from 5 to 50 degrees. For pipe Ø up to 60mm. Zinc plated connect. piece, lead plate. Size: 400 x 300mm. Connec. 0.6mm thick, Plate 0.8 mm thick.
Sealing Collar/Sealing Stap
Weatherproof, rain-tight covering for the mast roof entry plate. For pipe Ø 48-57mm.
Mast Cap
Black plastic end piece for the antenna mast. For pipe Ø 32-60mm. |
