|
Related Links: Masthead Amplifiers
1) TV Aerial: Take a length of coax from the aerial into the input marked UHF on the Amp. Place amp at least 1m from the aerial. 2) Masthead Amplifier: Feed coax from the outputs of the amplifier to the various rooms. 3) Masthead Amplifier Power Supply:Make a short ‘fly lead’ with a coax plug each end and feed from the output marked TV on the power supply into your TV/Freeview box etc. Power Supply can go in any room fed from the amp. 4) TV/Freeview Box etc.: Plug the power supply in. Now place the coax feed from the amp into the other input on the power supply. Often marked AE. The signal passes through the power supply and out the fly lead. The 12 volts goes back up the coax and powers the amplifier.
|
