A126 Mixer-Amplifier
6 channel mixer amplifier providing 100V line or mono 8 Ohm speaker output. All 6 channels have balanced combo inputs (XLRF/jack) or twin RCA mono line inputs. Rear panel DIP switches offer options for Mic/Line and phantom power for each channel, Vox priority for Channels 1 and 2 and a chime alert for channel 1. A send/return loop is provided for patching in external processors (e.g. graphic EQ, compressor etc.) and a Slave out RCA allows the mix to be connected to subsequent amplifiers. Speaker outputs have options for 8 or 16 Ohm operation or wire terminals for 100V line output.
Power (mains): 230Vac, 50Hz
Power (battery): 24Vdc (8A)
DC power: 92W
Output power: RMS <2% T.H.D.: 120W
Ouput power (max.): 160W
Frequency response: 100Hz - 10kHz (+/-3dB)
Input impedance (line): 10k Ohms
Input impedance (mic): 1.8k Ohms
Input impedance (return): 10k Ohms
Input sensitivity (line, balanced): 300mV (-11.37dBV)
Input sensitivity (mic, balanced): 1.5mV (-56.4dBv)
Input sensitivity (mic, unbalanced): 26mV (-31.7dBV)
Input sensitivity (return): 1V (0dBV)
Output (speaker): 8 Ohms, 16 Ohms, 70V and 100V
Signal to noise ratio: >92dB
Dimensions: 484 x 88 x 325mm
Weight: 10kg
|
